I generated a 4 color STL of the 2024 Dragon with the amazing HueForge program. I used Red and Yellow colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made this file you should check out HueForge its very affordable and only takes some messing around to get used to the program and make amazing looking prints.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Polyterra Charcoal Black Transmission Distance: 0.3
Polylite Red Transmission Distance: 7.5
Polylite Yellow Transmission Distance: 11
Polyterra Cloud White Transmission Distance: 6

Swap Instructions:
Charcoal Black until layer #5 at 0.48mms
Red until layer #18 at 1.52mms
Yellow until layer #25 at 2.08mms
Cloud White until layer #28 at 2.32mms

The slicer software I used was Bambulab and the printer is the Bambu X1 carbon with AMS.

Keep and eye out if your interested in more HueForge models I plan to upload many more.

Thanks